SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperatureplatform. The …
-
-
This bmp180 from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter …
-
In this example we connect the MCP9808 to the ESP32 The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.5°C (max.) accuracy. The …
-
In this example we will be connecting an HDC1008 module to an ESP32 module, we used a Lolin32 from Wemos but other makes should work fine as well. The HDC1000 …
-
[pdfviewer width=”600px” height=”849px” beta=”true/false”]http://www.esp32learning.com/wp-content/uploads/2017/11/esp32_at_instruction_set_and_examples_en.pdf[/pdfviewer]
-
[pdfviewer width=”600px” height=”849px” beta=”true/false”]http://www.esp32learning.com/wp-content/uploads/2017/11/esp32_datasheet_en.pdf[/pdfviewer]
-
In this article we look at an ESP32 based board which goes by the name of ESPDUINO-32, it is also supposedly made by www.doit.am. I have seen a few clones …
-
In this example we will use Micropython on an ESP32, the tool I will use is called uPyCraft which makes the task easy You will need to download the tool …
-
In this example we will create a basic web server with an ESP32, we will then serve a we page with an on and off button which will switch an …
-
This is a very basic example for the ESP32 board, the only reason for this is to show that unlike the ESP8266 boards the ESP32 has more than one Analog …
-
This is the github instructions, I have been looking at the ESP32 module My ESP Arduino installation is located at J:\esp on my PC but other than changing the paths everything …